The multiscale fret configuration increases the tension and clarity for the low strings while reducing the tension on the high strings for more supple string bending techniques.  Due to the natural arc of the hand as it pivots from the elbow, playability is further enhanced by the fan-like fret geometry.  

Individual Fulcrum™ tuning machines provide precise and stable tuning.  Low friction, up-facing tuning knobs are convenient and rotate with minimal finger pressure. Machined from aircraft aluminum and hardened steel by RWB, the patented, self-clamping tuning mechanism allows for quick and easy string changes without the need for tools.

The FIN Guitar is balanced so that when it is hanging on a strap the neck remains at whatever angle the player chooses without having to hold it in place.  For playing while seated, a folding leg rest is placed so that the guitar is balanced for use with both the right and left leg. 

There are four EMG™ individual S4 passive humbucker pickups, 2 in doubled bridge configuration.

Versatile dual mode electronics allow for a choice between passive or active output.  Pulling up on the master volume control switches the Mi-Si Activator™ circuit on, providing low impedance output with 6 DB boost.  Rechargeable supercapacitor technology eliminates the need for batteries and requires only one minute for a full charge. 

Length Overall: 34.08 inches

Width Overall: 9.72 inches

Weight: 5.27 lbs. (2292g)

Nut: Aluminum

Body and neck: Maple with carbon reinforced neck structure and folding leg rest

Truss rod: Dual action carbon fiber

Selectable Mi-Si Activator™ preamp at middle knob: adjustable 3 to 12DB boost, and low impedance output. Supercapacitor powered; charges in 120 seconds via output jack. When disengaged, the Activator does not affect passive function of guitar.

Folding leg rest

Made in the USA

The multiscale fret configuration increases the tension and clarity for the low strings while reducing the tension on the high strings for more supple string bending techniques.  Due to the natural arc of the hand as it pivots from the elbow, playability is further enhanced by the fan-like fret geometry.  

Individual Fulcrum™ tuning machines provide precise and stable tuning.  Low friction, up-facing tuning knobs are convenient and rotate with minimal finger pressure. Machined from aircraft aluminum and hardened steel by RWB, the patented, self-clamping tuning mechanism allows for quick and easy string changes without the need for tools.

The FIN Guitar is balanced so that when it is hanging on a strap the neck remains at whatever angle the player chooses without having to hold it in place.  For playing while seated, a folding leg rest is placed so that the guitar is balanced for use with both the right and left leg. 

The single pickup housing contains three individual dual coil hum canceling pickups by EMG™.  A five-way pickup selector allows the player to choose the neck pickup, the middle pickup, the bridge pickup, the bridge and middle pickup, and all three pickups at once.  A push-pull tone pot provides coil splitting for single coil sound when desired.

Versatile dual mode electronics allow for a choice between passive or active output.  Pulling up on the master volume control switches the Activator™ circuit on, providing low impedance output with 6 DB boost.  Rechargeable supercapacitor technology eliminates the need for batteries and requires only one minute for a full charge. 

Length Overall:​  33.75 inches

Width Overall:  9.18 inches

Weight:  5.5 lbs.

Scale length:​

• High E string – 25.0 inches
• Low E string – 26.0 inches

String width:

• Nut – 1.42 inches
• Bridge – 2.06 inches

Neck width:

• Nut – 1.65 inches
• 12^th fret – 2.01 inches

Fingerboard:

• Unidirectional carbon fiber
• 12 inch radius
• 24 medium jumbo frets

Nut: ​ Aluminum

Body and neck structure:  Monocoque 245GSM 2×2 twill carbon fiber 

Bridge/Tuners:

• NS Fulcrum™ Self-Clamping Tuning System with up-facing knobs
• Accepts all standard guitar strings, no tools required
• Height and intonation adjustment with locking saddles
• Made in USA by RWB Precision Engineering
• US Patent No. 9,564,110

Truss rod: dual action with differential thread 

Electronics:

• 3 passive humbucker pickups by EMG (neck, middle, bridge) in one housing
• Pickup selector with 5 positions:
  1. neck only
  2. neck, middle, and bridge
  3. middle only
  4. middle and bridge
  5. bridge only
• Supercapacitor-powered Activator™ preamp by Mi-Si: provides a 6 Db boost and a clean low impedance output. A small charger plugs directly into a 110 or 220 volt outlet. To charge, a ¼” phono plug wired to the charger is plugged directly into the output jack of the guitar.  A full charge requires only one minute and delivers 16 hours of continuous playing time. When the Activator is switched off, it has no effect on the passive sound. No batteries are required.
• Push-pull tone knob switches to single coil pickup configuration
• Push-pull master volume knob for active/passive option 

Folding leg rest

Made in the USA

The multiscale fret configuration increases the tension and clarity for the low strings while reducing the tension on the high strings for more supple string bending techniques.  Due to the natural arc of the hand as it pivots from the elbow, playability is further enhanced by the fan-like fret geometry.

The FIN Bass Guitar is balanced so that when it is hanging on a strap the neck remains at whatever angle the player chooses without having to hold it in place.  For playing while seated, a folding leg rest is placed so that the guitar is balanced for use with both the right and left leg.

The single pickup housing contains three individual dual coil hum canceling pickups by EMG™.  A five way pickup selector allows the player to choose the neck pickup, the middle pickup, the bridge pickup, the bridge and the middle pickup, and all three pickups at once.  Volume for each pickup is controlled by three low profile knobs located below each pickup so that the player can dial in the desired tone.

The instrument is powered with a preamp designed and fabricated for the FIN Bass by EMG.  This high-performance circuit includes master volume, treble, and bass controls.

Low friction ball bearing tuners are easy to use, providing extremely precise and stable tuning with minimal finger pressure required.  Action and intonation adjustments feature locking bridge saddles for added security and enhanced tonal response.

Length Overall:​  43.4 inches

Width Overall:  11.0 inches

Weight:  8 lbs.

Scale length:​

• High C string – 33.75 inches
• Low B string – 35.25 inches

String width:

• Nut – 1.81 inches
• Bridge – 3.35 inches

Neck width:

• Nut – 2.1 inches
• 12^th fret – 2.95 inches

Fingerboard:

• Unidirectional Carbon Fiber
• 12 inch Radius
• 24 medium jumbo frets

Nut: ​ Aluminum

Body and neck structure:  Monocoque 245GSM 2×2 twill carbon fiber 

Bridge/Tuners:

• Low friction ball bearing thrust bearings make tuning easy and precise
• Accepts all standard guitar strings.
• Height and intonation adjustment with locking saddles 
• Truss rod: dual action with differential thread 

Electronics:

• 3 hum-canceling pickups by EMG (neck, middle, bridge) in one housing
• Individual level control knobs or each pickup
• Active preamp by EMG, with master volume, treble, and bass control knobs
• Pickup selector with 5 positions:
  1. neck only
  2. neck, middle, and bridge
  3. middle only
  4. middle and bridge
  5. bridge only

Folding leg rest

Made in the USA 

The NS Polar Pickup System has the unique ability to analyze the direction of string vibration to enhance the bowed response and to facilitate bow technique.

The unusually powerful piezo crystals do not require on-board power, for maintenance-free performance without the hassle of batteries.

The WAV series bridge is crafted from rock maple and is easily adjustable.

Other standard features of the WAV Violas include a graduated ebony fingerboard, a smooth and fast neck, and a removable bout for accurate position reference.

WAV violas are available in four and five string configurations, and several finish options.

LENGTH: 540 MM (21.25″)

WIDTH: 110 MM (4 5/16″)

THICKNESS: 65 MM (2 9/16″)

WEIGHT: Highly carved interior for light comfort.
4 string: 670g
5 string: 695g

SCALE LENGTH: 330 MM (13″)

BODY/NECK: Maple neck and body for rich tone and visual grace.

BODY REFERENCE BOUT: Black-dyed maple bout on treble side provides standard viola reference. Easily removable for unrestricted neck access.

FINGERBOARD: Ebony, hand-graduated, asymmetric relief, shaped for effortless play.

BRIDGE: Black-dyed maple, height adjustable via screws on back of body.

STRINGS: NS Electric Strings are standard.  Compatible with solid and stranded core viola strings.  Synthetic core strings are not recommended.

PRECISION TUNING HARDWARE: NS Design patented tuning system. Fine tuners are mounted on the body behind the bridge for precise, stable tuning. Automatic string clamping allows for quick, easy string changes.

PICKUP: The Polar directional piezo pickup system responds selectively to either lateral string vibration (for dynamic bowing) or vertical string vibration (for remarkably even and sustained plucked/pizzicato sound, like a mandolin).

ELECTRONICS & CONTROLS: Passive circuit with high impedance output, no batteries required. Volume control and Tone control (treble roll off).

NXTa Radius Neck – The headless, bolt-on maple neck has 24 frets, a 34” scale for the NXT4a and 35″ scale for the NXT5a, and a familiar 15” radius. A volute provides thumb reference at the nut. String slots in the aluminum headplate eliminate the need for a headstock with heavy tuning machines. Conveniently accessed from the top of the neck, the steel double-action reinforcing truss rod, gives both rigidity and precise relief control.

NS Diradial™ Body – The concave back profile provides a sense of comfort and stability against the torso. The front of the instrument is more tightly radiused, which, in with the general wedge shape of the body, creates a more comfortable orientation to the right hand. The configuration of the body cutaway provides easy access to the highest frets.

Perfectly balanced, the NXTa has no downward dip of the neck, for effortless left-hand freedom. Combined, the shape, balance and light weight (the NXT4a is just 7.8 lbs) make this instrument incredibly comfortable to play.

Dual Mode (Active/Passive) Output Electronics – The NS Radius features custom EMG magnetic pickups with a radiused top and magnetic structure designed to optimally capture the full richness of tone from every string. The controls are a familiar Volume-Volume-Tone configuration. The Tone control is also a push-pull knob, used to select between the NXTa’s active or passive output modes. The active mode is battery-free; the special supercapacitor-based circuitry charges in 60 seconds to deliver active output for 16 hours from the time of the charge. The instrument is supplied with an AC charger which plugs into the guitar’s output jack.

Patented Self-Clamping Tuning System – Fast and simple, this self-clamping precision tuning system is integrated into the body of the RADIUS. Any standard single-ball end, full-scale bass guitar string can be used – simply rotate the knurled knob for a quick string change and to bring it to precise pitch.

Bridge and Saddle – The aluminum one-piece bridge and saddle assembly provide broad height and angle adjustment. Allows the player to precisely tailor the action and adjust the intonation.

Gig Bag – The RADIUS bass guitar includes a padded gig bag with a handle, adjustable backpack straps and a large front zipper pocket with room for cables and gear. The loaded gig bag will fit in the overhead compartment of most commercial aircraft.

Dimensions	NXT4a	NXT5a
Overall Length	41.5″	42.25″
Body Length	20.8″	20.8″
Neck Scale	34″	35″
Neck Radius	15″	15″
Weight	7.8lbs	8.6lbs
Bridge Spacing	19mm	18mm
Nut Width	1.60″	1.85″
12th Fret Width	2.19″	2.54″

Active Mode power supply – AC-charged super-capacitor circuitry

Strings – D’Addario EXL170 Nickel Round Wound

Owner’s Manual and tool kit included

The Polar™ Bridge Pickup System combines great sound with directional sensitivity, for a rich and expressive response to Arco and Pizzicato technique.  The Omni Bass responds to the bow with a natural and expressive voice, combining powerful bass resonance with brilliant harmonics. The strings are easily driven, making it possible for bassists with little bowing experience to add this beautiful dimension to their music.

The WAV can be played using any amplifier with high impedance input, or with any other gear using a direct box. WAV instruments are battery-free, eliminating the hassle and cost of batteries while helping protect our environment.

The 34″ scale length of the Omni Bass is the same as standard electric bass, and is available in 4 and 5 string versions. Tuned in fourths (EADGC or BEADG), the fingering positions and spacing are identical to the bass guitar, and therefore immediately familiar to any bass player.

The fingerboard also features the TransRadius™ profile. For a left-hand feel which is familiar to the experienced bass guitarist, the radius at the nut is 9-1/4 inches. At the end of the fingerboard near the bridge, however, the radius is just 2 inches, large enough to maintain good string-to-string articulation with the bow, yet still comfortable for pizzicato (plucked/picked) style. The asymmetrical fingerboard relief facilitates an even ‘growl’ from the higher strings and a clear, powerful lower register.

The solid maple body and neck, together with the graduated fingerboard, deliver a rich, full tone that rings true for every note. The adjustable bridge and two-way truss rod allow for low, fast action, or for higher string settings that encourage the traditional acoustic player to ‘dig in’ with gusto. NS Electric Omni Bass Strings and standard bass guitar strings fit the Omni Bass, adding unlimited set up options for musicians who want to explore and create their own unique sound.

The Boomerang™ Strap System is standard with the WAV Omni Bass. Two articulated arms and a pivoting hub allow full mobility on stage or in studio. The comfortable Boomerang strap fits over the shoulder just like a guitar, but the adjustable arms allow the instrument to be placed in virtually any position in relation to the hands and body. The Boomerang Strap System allows full mobility for either bowing or plucking.

WEIGHT: WAV4 – 3.2 kg (7 lbs.); WAV5 – 3.23 kg (7.2 lbs.).

SCALE LENGTH: 86 cm (34″)

STRING TUNINGS: 4 string EADG; 5 string BEADG or EADGC.

STRINGS: NS Omni Bass strings by D’Addario™. The Omni Bass also accommodates most long scale bass guitar strings.

BODY/NECK: Solid, straight grain maple neck and body. Flame maple face on all colors: Amberburst, Trans Red, and Trans Black.

FINGERBOARD: Asymmetric relief, intonation referenced with cascading dot markers & side dots. The 34″ scale length of the Omni Bass is the same as standard electric bass. Rosewood or Coform™.

TransRadius PROFILE: The fingerboard radius at the nut is 9-1/4 inches. At the end of the fingerboard near the bridge, the radius is 2 inches.

TRUSS ROD: Two-way truss rod, accessible at nut.

TUNING HARDWARE: Fully encased worm gear tuners, black finish.

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Passive circuit with high impedance output, no batteries required. Volume control, tone control (treble roll off) and a switch to select between Arco and Pizzicato mode.

NS Electric Strings and most traditional acoustic strings fit all NS Cellos, allowing the player to select from a wide range, each with a unique sound a feel. In combination with the easy adjustment of basic set-up parameters, the WAV cello is adaptable to a nearly limitless range of music styles.

A fully adjustable cello tripod stand can be used seated or standing. The optional Cello End Pin Stand provides the seated cellist familiar points of thigh contact and position. The optional Boomerang™ Strap System and The Frame Strap System allow the cellist to stand up with full mobility for a new experience of freedom and expression.

The WAV electric cello brings unprecedented affordability to the player interested in world-class design, craftsmanship and performance. With a visual appearance a striking as its sound, the roadworthy WAV is an exciting and reliable partner for the most demanding performance career.

LENGTH: 94.2 cm (37″)

WIDTH: 13.9 cm (5.5″)

THICKNESS: 9.4 cm (3.7″)

WEIGHT:

4 string: 2 kg (4.5 lbs.)

5 string: 2.1 kg (4.7 lbs.)

SCALE LENGTH: 69.5 cm (27.36″)

BODY/NECK: Solid, straight grain maple neck and body. Flame maple face on all colors: Amberburst, Transparent Red, and Transparent Black.

FINGERBOARD: Asymmetrical fingerboard relief. Intonation referenced with cascading dot markers. Rosewood or Coform™.

TRUSS ROD: Two-way truss rod, accessible at neck.

TUNING HARDWARE: Fully encased worm gear tuners, black finish.

STRINGING: 4 string tuning: C G D A5 string tuning: Low F C G D A; High E tuning also available by request: C G D A E.

STRINGS: NS Electric Cello Strings supplied; the NS is designed to fit and is compatible with most standard strings.

BRIDGE PICKUP: The NS Cello features the Polar bridge-mounted piezo pickup system which responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Passive circuit with high impedance output, no batteries required. Rotary for Volume, Tone (Treble roll off), 2-way toggle switch for Polar Pickup System.

Using set screws, the rock-maple bridge can be readily adjusted to the desired action height—high and powerful, low and fast, or anywhere in between.

A contoured ebony chin rest is standard. The optional Adjustable Chin Rest is also available for players wanting a more extensive range of position adjustments for further customized fit and comfort.

The standard Custom Shoulder Rest is highly adjustable, and whose base can be readily formed to fit the chest and shoulder perfectly. The NXTa also accepts NS Design’s revolutionary Balanced Shoulder Rest, which secures it effortlessly in optimal playing position.

The patented tuning system built into the bottom of the body allows quick, easy and precise adjustment, exceptional pitch stability, and easy string changes.

At the heart of the NXTa is the Polar™ Pickup System, whose piezo components convert string vibration directly to signal output. This provides a balanced, tonally rich output, offering a wide range of expressive opportunities. Arco and Pizzicato have significantly different vibration characteristics, and the Polar Pickup faithfully captures both.

Dual Mode Output – The new dual mode signal output electronics of the NXTa takes the convenience, versatility and performance capability of the NXT to another level.

Active Mode – Using the supplied charger, connect the NXTa to any AC outlet for 60 seconds. This will fuel the capacitor-powered active circuit for 16 hours from the time of the charge. The instrument can then be plugged straight into any low or high impedance device, no direct box necessary. Since there is no signal loss over the full frequency spectrum of the instrument, the fundamentals of every note remain clear and strong, even with extra-long cables.

Passive Mode – The NXTa can be played in this mode with an amplifier with an impedance of 1 meg ohm or greater (3-10 meg ohm recommended) or with a direct box. (This mode provides performance capabilities identical to the original NXT.)

Eco-Friendly Operation – NXTa instruments are battery-free, eliminating the hassle and cost of batteries while helping protect our environment.

LENGTH: 540 MM (21.25″)

WIDTH: 110 MM (4 5/16″)

THICKNESS: 65 MM (2 9/16″)

WEIGHT: 4 string: 585g, 5 string: 610g

SCALE LENGTH: 330 MM (13″)

BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body.

BODY REFERENCE BOUT: Black-dyed maple bout on treble side provides standard violin reference. Easily removable for unrestricted neck access.

FINGERBOARD: Hand-graduated, asymmetric relief. NXTa violins are also available with fretted fingerboards.

BRIDGE: Black-dyed maple, height adjustable via screws on back of body.

STRINGS: NS Electric Strings are standard.  Compatible with solid and stranded core violin strings.  Synthetic core strings are not recommended.

PRECISION TUNING HARDWARE: Fine tuners are mounted on the body behind the bridge for precise, stable tuning. Automatic string clamping allows for quick, easy string changes.

PICKUP: The Polar directional piezo pickup system responds selectively to either lateral string vibration (for dynamic bowing) or vertical string vibration (for remarkably even and sustained plucked/pizzicato sound, like a mandolin). A switch allows the player to choose the desired response.

ELECTRONICS & CONTROLS: Rotary volume control, with push-pull selection between Active and Passive output mode; Tone control (treble roll off); Arco/Pizzicato toggle switch.

LENGTH: 585 MM (23″)

WIDTH: 117 MM (4.6″)

THICKNESS: 49 MM (1.92″)

WEIGHT: 650g

SCALE LENGTH: 366 MM (14.4″)

BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body.

BODY REFERENCE BOUT: Black-dyed maple bout on treble side provides standard viola reference. Easily removable for unrestricted fingerboard access.

FINGERBOARD: Hand-graduated, featuring asymmetric curvature specially designed for enhanced left-hand playing ease.

BRIDGE: Black-dyed maple, adjustable for preferred string height via screws accessed from the back.

STRINGS: NS Electric Strings by D’Addario™ are standard.  Compatible with solid and stranded core viola strings.  Synthetic core strings are not recommended.

PRECISION TUNING HARDWARE: NS Design patented tuning system. Fine tuners are mounted on the body behind the bridge for precise, stable tuning. Automatic string clamping allows for quick, easy string changes.

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration  (for remarkably even and sustained plucked/pizzicato sound, like a mandolin), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Rotary volume control, with push-pull selection between Active and Passive output mode; Tone control (treble roll off); Arco/Pizzicato toggle switch.

DUAL MODE OUTPUT – The new dual mode signal output electronics of the NXTa take the convenience, versatility and performance capability of the NXT to another level.

ACTIVE MODE – Using the supplied charger, the NXTa connects into any AC outlet for 60 seconds, powering the capacitor-powered active circuit for 16 hours from the time of the charge. The instrument can then be plugged straight into any low or high impedance device, no direct box necessary. Since there is no signal loss over the full frequency spectrum of the instrument, the fundamentals of every note remain clear and strong, even with extra-long cables.

PASSIVE MODE – The NXTa can be played in this mode when using a direct box or an amplifier with high impedance input. (This mode provides performance capabilities identical to the original NXT.)

ECO-FRIENDLY OPERATION – NXTa instruments are battery-free, eliminating the hassle and cost of batteries while helping protect our environment.

SOLID MAPLE BODY AND NECK – together with the graduated fingerboard, deliver a rich, full tone that rings true for every note. Asymmetrical fingerboard relief facilitates an even ‘growl’ from the higher strings and a clear, powerful lower register. The adjustable bridge and truss rod allow for low, fast action, or for higher string settings that encourage the traditional acoustic player to ‘dig in’ with gusto.

NS ELECTRIC STRINGS and most traditional acoustic strings fit all NS Double Basses, allowing the player to select from a wide range, each with a unique sound and feel. In combination with the easy adjustment of basic set-up parameters, the NXTa Series Bass is adaptable to many different styles of music.

GIG BAG AND FLIGHT CASE – The NXTa double bass includes a padded gig bag that has a pouch for tripod stand, a bow compartment and room for the charger and accessories. The loaded gig bag will fit in the overhead compartment of most commercial aircraft.  An optional hard-shell flight case is available for the NXTa double bass.

LENGTH: 132 cm (52″)

WIDTH: 15 cm (6″)

THICKNESS: 10 cm (4″)

WEIGHT: 4.8 kg (10.5 lbs.)

SCALE LENGTH: 106 cm (41.73″)

STRINGS: 4 or 5 (Low B or high C). Equipped with NS Contemporary Bass Strings by D’Addario™. Compatible with most standard upright bass strings.

BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body.

FINGERBOARD: Hand-graduated. Intonation referenced with cascading dot markers.

TRUSS ROD: Single Action, accessible at nut.

TUNING HARDWARE: Fully encased worm gear tuners, black finish.

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Rotary volume control, with push-pull selection between Active and Self-Powered output mode; Tone control (treble roll off); Arco/Pizzicato toggle switch.

The tone quality and dynamic range of the NXTa cello owes much to the self-powered NS Polar™ Pickup System. Employing special piezo crystals, mounted beneath the bridge, the pickup captures the full sound spectrum created by the strings and body of the instrument. Arco versus Pizzicato playing creates more vibration energy in one direction than the other, and a convenient switch on the side of the NXTa actually allows the player to select sensitivity for either mode. The result is either more percussive response, or smoother and sustained response, adding a new dimension to what the player can create musically.

Dual Mode Output – The new dual mode signal output electronics of the NXTa take the convenience, versatility and performance capability of the NXT to another level.

Active Mode – Using the supplied charger, the NXTa connects into any AC outlet for 60 seconds, powering the capacitor-powered active circuit for 16 hours  from the time of the charge. The instrument can then be plugged straight into any low or high impedance device, no direct box necessary. Since there is no signal loss over the full frequency spectrum of the instrument, the fundamentals of every note remain clear and strong, even with extra-long cables.

Passive Mode – The NXTa can be played in this mode when using a direct box or an amplifier with high impedance input. (This mode provides performance capabilities identical to the original NXT.)

Eco-Friendly Operation – NXTa instruments are battery-free, eliminating the hassle and cost of batteries while helping protect our environment.

The solid maple body and neck along with the graduated fingerboard contribute to the delivery of a rich, full tone that rings true for every note. Asymmetrical fingerboard relief provides extraordinary ease of playability from the lowest to the highest positions. To suit individual player preferences, the fingerboard relief can be adjusted via the truss rod in the neck, and the string height is readily adjustable at the bridge.

NS Electric Strings and most traditional acoustic strings fit all NS cellos, allowing the player to select from a wide range, each with a unique sound a feel. In combination with the easy adjustment of basic set-up parameters, the NXTa Series Cello is adaptable to a nearly limitless range of music styles.

LENGTH: 94.2 cm (37″)

WIDTH: 13.9 cm (5.5″)

THICKNESS: 9.4 cm (3.7″)

WEIGHT:4 string: 1.9 kg (4.1 lbs.)5 string: 1.9 kg (4.2 lbs.)

SCALE LENGTH: 69.5 cm (27.36″”)

BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body. Brass escutcheon pin on the rear of the neck serves as a reference point corresponding to the heel of an acoustic cello.

FINGERBOARD: Hand-graduated. Intonation referenced with cascading dot markers. NXTa cellos are also available with fretted fingerboards.

STRING TUNING:4 string tuning: C G D A5 string tuning: Low F C G D A; High E tuning also available by request: C G D A E

STRINGS: NS Electric Cello Strings supplied; the NS is designed to fit and is compatible with most standard strings.

TRUSS ROD: Single Action.

TUNING HARDWARE: Fully encased worm gear tuners, black finish.

BRIDGE PICKUP: The NS Cello features the Polar bridge-mounted piezo pickup system which responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Rotary volume control; Tone control (treble roll off), with push-pull selection between Active and Passive output mode; Arco/Pizzicato toggle switch.

The solid maple body and neck with a graduated fingerboard, delivers the rich, full tone you expect from every NS Instrument. The WAV Series brings the same clarity and fullness with every note. Asymmetrical fingerboard relief and an adjustable bridge and two-way truss rod allow the player to tweak the neck relief and string heights to suit the music and personal playing style.

Compact and lightweight, the WAV Double Bass is an excellent instrument for musicians on the move. It comes equipped with a stand, and padded gig bag that carries the instrument with a handle and strap and includes separate pouch compartments for storing the stand, bow and accessories. The loaded gig bag will fit in the overhead compartment of most commercial aircraft. An optional hard-shell flight case is available for the WAV Double Bass.

NS Electric Strings and most traditional acoustic strings fit all NS Double Basses, allowing the player to select from a wide range, each with a unique sound and feel. In combination with the easy adjustment of basic set-up parameters, the WAV Series Bass is adaptable to virtually any style of music.

Several interchangeable performance support systems are available for the WAV: The standard WAV/NXT Tripod Stand; the heavy-duty CR Tripod Stand (optional); the more conventional Bass End Pin Stand and optional Conversion Kit (used in conjunction with the CR Tripod Stand); or full mobility either the Boomerang™ Strap System or the Frame Strap System.

LENGTH: 132 cm (52″)

WIDTH: 15 cm (6″)

THICKNESS: 10 cm (4″)

WEIGHT: 4-String 8lbs 12.8oz (4.0 kg); 5-String 9lbs (4.1 kg)

SCALE LENGTH: 106 cm (41.73″)

STRINGS: 4 or 5 (Low B). Compatible with most standard ¾ size double bass strings.

BODY/NECK: Solid, straight grain maple neck and body. Flame maple face on the Amberburst, Transparent Red, and Transparent Black models; Brilliant White model has solid maple.

FINGERBOARD: Asymmetric relief for easy playability in every position. Intonation referenced with cascading dot markers. Rosewood or Coform™.

TRUSS ROD: Two-way truss rod, accessible at neck.

TUNING HARDWARE: Fully encased worm gear tuners, black finish.

BRIDGE PICKUP: The Polar piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Passive circuit with high impedance output, no batteries required. Volume control, tone control (treble roll off) and a switch to select between Arco and Pizzicato mode.

The Polar™ Bridge Pickup System combines great sound with directional sensitivity, for a rich and expressive response to Arco and Pizzicato technique.  The Omni Bass responds to the bow with a natural and expressive voice, combining powerful bass resonance with brilliant harmonics. The strings are easily driven, making it possible for bassists with little bowing experience to add this beautiful dimension to their music.

Dual Mode Output – The new dual mode signal output electronics of the NXTa take the convenience, versatility and performance capability of the NXT to another level.

Active Mode – Using the supplied charger, the NXTa connects into any AC outlet for 60 seconds, powering the capacitor-powered active circuit for 16 hours from the time of the charge. The instrument can then be plugged straight into any low or high impedance device, no direct box necessary. Since there is no signal loss over the full frequency spectrum of the instrument, the fundamentals of every note remain clear and strong, even with extra-long cables.

Passive Mode – The NXTa can be played in this mode when using a direct box or an amplifier with high impedance input. (This mode provides performance capabilities identical to the original NXT.)

Eco-Friendly Operation – NXTa instruments are battery-free, eliminating the hassle and cost of batteries while helping protect our environment.

The 34″ scale length of the Omni Bass is the same as standard electric bass, and is available in 4 and 5 string versions. Tuned in fourths (EADGC or BEADG), the fingering positions and spacing are identical to the bass guitar, and therefore immediately familiar to any bass player.

The fingerboard also features the TransRadius™ profile. For a left-hand feel which is familiar to the experienced bass guitarist, the radius at the nut is 9-1/4 inches. At the end of the fingerboard near the bridge, however, the radius is just 2 inches, large enough to maintain good string-to-string articulation with the bow, yet still comfortable for pizzicato (plucked/picked) style. The asymmetrical fingerboard relief facilitates an even ‘growl’ from the higher strings and a clear, powerful lower register.

The solid maple body and neck, together with the graduated fingerboard, deliver a rich, full tone that rings true for every note. The adjustable bridge and truss rod allow for low, fast action, or for higher string settings that encourage the traditional acoustic player to ‘dig in’ with gusto. NS Electric Omni Bass Strings and standard bass guitar strings fit the Omni Bass, adding unlimited set up options for musicians who want to explore and create their own unique sound.

LENGTH: 113 cm (44″)

WIDTH: 15 cm (5.7″)

THICKNESS: 10 cm (4″)

WEIGHT: 3.2 kg (7 lbs.)

SCALE LENGTH: 86 cm (34″)

STRING TUNINGS: 4 string E,A,D,G; 5 string B,E,A,D,G or E,A,D,G,C.

STRINGS: NS Omni Bass strings by D’Addario™. The Omni Bass also accommodates most long scale bass guitar strings.

BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body.

FINGERBOARD: Hand-graduated, asymmetric. Intonation referenced with cascading dot markers & side dots. The 34″ scale length of the Omni Bass is the same as standard electric bass.

TransRadius PROFILE: The fingerboard radius at the nut is 9-1/4 inches. At the end of the fingerboard near the bridge, the radius is 2 inches.

TRUSS ROD: Single Action, accessible at nut.

TUNING HARDWARE: Fully encased worm gear tuners, black finish.

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Rotary volume control, with push-pull selection between Active and Passive output mode; Tone control (treble roll off); Arco/Pizzicato toggle switch.

NS DIRADIAL™ BODY: The concave back profile provides a sense of comfort and stability against the torso. The front of the instrument is more tightly radiused, which, in combination with the general wedge shape of the body, creates a more comfortable orientation to the right hand. The configuration of the body cutaway provides easy access to the highest frets. The tuning system is integrated into the body. 

NS RADIUS NECK: The headless, one-piece bolt-on maple neck has 24 frets, a 34″ scale for the WAV4 and 35″ scale for the WAV5, and a familiar 15″ radius. A volute provides thumb reference at the nut. String slots in the aluminum headplate eliminate the need for a headstock with heavy tuning machines. Conveniently accessed from the top of the neck, the heavy-duty steel double-action reinforcing truss rod, with its patented differential thread drive, gives both rigidity and precise relief control.

NS POLAR™/EMG™ HIGH IMPEDANCE DUAL PICKUP SYSTEM: Active electronics, including the 9-volt onboard preamp and EQ, integrate a magnetic custom EMG RADIUS pickup and the NS bridge-mounted Polar pickup. The EMG pickup has a radiused top and magnetic structure to optimize the tone and harmonics from every string. The Polar pickup is a unique piezo design, combining a tight and powerful low end with exceptional clarity. The WAV offers master volume and balance controls, along with separate tone controls for each pickup.

BRIDGE & SADDLE: The aluminum one-piece bridge and saddle assembly provide broad height and angle adjustment, allowing the player to precisely tailor the action and adjust the intonation.

GIG BAG: The WAV RADIUS bass guitar includes a padded gig bag with a handle, adjustable backpack straps and a large front zipper pocket with room for cables and gear. The loaded gig bag will fit in the overhead compartment of most commercial aircraft.

Overall Length: 41.5″ / 42.25″

Body Length: 20.8″

Frets: 24

Neck scale: 34″ / 35″

Neck radius: 15″

Weight: 8.0 lbs / 8.2 lbs

Bridge Spacing: 19mm / 18mm

Nut Width: 1.60″ / 1.85″

12th Fret Width: 2.19″ / 2.54″

Power Supply: 9V

Standard strings: D’Addario™ EXL170Nickel Round Wound

NS FUSION NECK: The RADIUS features a bolt-on one-piece maple neck with continuous carbon fiber reinforcement and steel double-action reinforcing truss rod. This combination has the natural feel of wood, but the core provides enhanced sustain and definition to each note. The fingerboard, which has a 15″ radius, is 34″ scale for the CR4 and CR6, and 35″ scale for the CR5. Heavy conventional tuning machines are replaced by an aluminum headplate with ball-end string mounting slots. The tuning system is integrated into the body.

NS DIRADIAL BODY: The RADIUS’s maple body, with flamed maple top, has a concave back radius, which provides enhanced contact and stability against the torso. The front of the instrument is more tightly radiused, which, in combination with the general wedge shape of the body, shifts it into more comfortable orientation with the right hand. The distinctive horn provides a natural grip, and the configuration of the body cutaway provides easy access to the highest frets.

The instrument as a whole is perfectly balanced, no downward dip of the neck, giving the left hand unprecedented freedom. Combined, the shape, balance and light weight of the RADIUS make this instrument exceptionally comfortable to play.

NS/EMG INTEGRAL PICKUP SYSTEM: NS Design and EMG have collaborated to create this integrated piezo and magnetic pickup system. It features an 18-volt onboard preamp, which provides extraordinary dynamic headroom. The active electronics are combined with the NS bridge-mounted Polar™ Pickup System, the marriage of which puts an exceptionally broad, musically rich spectrum of tone at the player’s fingertips.

CONTROLS: The controls on the RADIUS bass give the player full ability to shape and mix the magnetic and piezo output: Master Volume, active Treble cut/boost, active Bass cut/boost, rotary magnetic/piezo pickup blend, 3-position magnetic pickup selector switch, and 3-position piezo EQ switch.

BRIDGE & SADDLE: The aluminum one-piece bridge and saddle assembly provide full height and angle adjustment, allowing the player to precisely tailor the action and tweak the intonation with the adjustment of hex head set screws (hex key included).

GIG BAG: The RADIUS bass guitar includes a deluxe padded gig bag with a handle, adjustable backpack straps and a large front zipper pocket with room for cables and gear. The loaded gig bag will fit in the overhead compartment of most commercial aircraft.

	CR4	CR5	CR6
Overall length	41.5″	42.25″	41.5″
Body length	20.8″	20.8″	20.8″
Neck scale	34″	35″	34″
Neck radius	15″	15″	15″
Weight	8.4 lbs	8.6 lbs	9.5 lbs
Bridge spacing	19mm	18mm	17mm
Nut width	1.60″	1.85″	2.06″
12th fret width	2.19″	2.54″	2.91″

The NS Polar Pickup System has the unique ability to analyze the direction of string vibration to enhance the bowed response and to facilitate bow technique.

The unusually powerful piezo crystals do not require on-board power, for maintenance-free performance without the hassle of batteries.

The WAV series bridge is crafted from rock maple and is easily adjustable.

Other standard features of the WAV Violins include a graduated ebony fingerboard, a smooth and fast neck, and a removable bout for accurate position reference.

WAV violins are available in four and five string configurations, and several finish options.

LENGTH: 540 MM (21.25″)

WIDTH: 110 MM (4 5/16″)

THICKNESS: 65 MM (2 9/16″)

WEIGHT: Highly carved interior for light comfort.
4 string: 670g
5 string: 695g

SCALE LENGTH: 330 MM (13″)

BODY/NECK: Maple neck and body for rich tone and visual grace.

BODY REFERENCE BOUT: Black-dyed maple bout on treble side provides standard violin reference. Easily removable for unrestricted neck access.

FINGERBOARD: Ebony, hand-graduated, asymmetric relief, shaped for effortless play.

BRIDGE: Black-dyed maple, height adjustable via screws on back of body.

STRINGS: NS Electric Strings are standard.  Compatible with solid and stranded core violin strings.  Synthetic core strings are not recommended.

PRECISION TUNING HARDWARE: NS Design patented tuning system. Fine tuners are mounted on the body behind the bridge for precise, stable tuning. Automatic string clamping allows for quick, easy string changes.

PICKUP: The Polar directional piezo pickup system responds selectively to either lateral string vibration (for dynamic bowing) or vertical string vibration (for remarkably even and sustained plucked/pizzicato sound, like a mandolin).

ELECTRONICS & CONTROLS: Passive circuit with high impedance output, no batteries required. Volume control and Tone control (treble roll off).

Using set screws, the rock-maple bridge can be readily adjusted to the desired action height—high and powerful, low and fast, or anywhere in between.

A contoured ebony chin rest is standard. The optional Adjustable Chin Rest is also available for players wanting a more extensive range of position adjustments for further customized fit and comfort.

The standard Custom Shoulder Rest is highly adjustable, and whose base can be readily formed to fit the chest and shoulder perfectly. The NXTa also accepts NS Design’s revolutionary Balanced Shoulder Rest, which secures it effortlessly in optimal playing position.

The patented tuning system built into the bottom of the body allows quick, easy and precise adjustment, exceptional pitch stability, and easy string changes.

At the heart of the NXT is the Polar™ Pickup System, whose piezo components convert string vibration directly to signal output. This provides a balanced, tonally rich output, offering a wide range of expressive opportunities. Arco and Pizzicato have significantly different vibration characteristics, and the Polar Pickup faithfully captures both.

LENGTH: 540 MM (21.25″)

WIDTH: 110 MM (4 5/16″)

THICKNESS: 65 MM (2 9/16″)

WEIGHT: 4 string: 585g, 5 string: 610g

SCALE LENGTH: 330 MM (13″)

BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body.

BODY REFERENCE BOUT: Black-dyed maple bout on treble side provides standard violin reference. Easily removable for unrestricted neck access.

FINGERBOARD: Hand-graduated, asymmetric relief. NXTa violins are also available with fretted fingerboards.

BRIDGE: Black-dyed maple, height adjustable via screws on back of body.

STRINGS: NS Electric Strings are standard.  Compatible with solid and stranded core violin strings.  Synthetic core strings are not recommended.

PRECISION TUNING HARDWARE: Fine tuners are mounted on the body behind the bridge for precise, stable tuning. Automatic string clamping allows for quick, easy string changes.

PICKUP: The Polar directional piezo pickup system responds selectively to either lateral string vibration (for dynamic bowing) or vertical string vibration (for remarkably even and sustained plucked/pizzicato sound, like a mandolin). A switch allows the player to choose the desired response.

ELECTRONICS & CONTROLS: Rotary volume control; Tone control (treble roll off); Arco/Pizzicato toggle switch.

SOLID MAPLE BODY AND NECK: The CR Violin is crafted of solid maple, with an elegant flame maple face. This lightweight solid-body design transfers the full spectrum of sound to the pickup without feedback, and is very stable even with changes in temperature and humidity. The ergonomic shoulder and chin rest provide comfortable, stable support, and a removable treble side bout is included for left hand position reference. The solid ebony fingerboard is hand graduated for consistent string articulation.

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like a mandolin), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ACTIVE ELECTRONICS: The dual mode preamp allows the player to choose between two very distinct tone qualities. The first mode delivers the full frequency response of modern low impedance electronics, for a rich, full-blown “electric violin” sound. The second is balanced to produce the frequency response of the traditional violin, for a more “acoustic” sound. A three-way toggle switch allows the player to select the desired pickup and electronics options. Additional controls include volume and individual bass EQ & treble EQ controls.

PRECISION TUNING HARDWARE: With the NS Design patented tuning system, remarkably precise and stable tuning is accomplished entirely behind the bridge, in the manner similar to the fine tuners of an acoustic instrument. With the elimination of the traditional scroll and pegs, weight is shifted in towards the body of the player for optimum comfort. Although specially formulated NS Electric Violin Strings from D’Addario™ are recommended, any standard solid or stranded core violin string will fit the NS Violin. We do not recommend nylon (Perlon) core or gut core strings.

LENGTH: 540 MM (21.25″)

WIDTH: 110 MM (4 5/16″)

THICKNESS: 65 MM (2 9/16″)

WEIGHT: 720 grams (25.5 oz)

SCALE LENGTH: 330 MM (13″)

STRING SPACING:

Model	Bridge	Nut
4-string	33.5 mm	16.2 mm
5-string	44 mm	21 mm
6-string	51.6 mm	23.2 mm

CONSTRUCTION: Straight grain quarter-sawn solid European maple body and neck, with a flame maple face.

FINISH: Traditional amber stain with polymer top coat. Custom finish options are available for the CR Violin including Slate Gray, Quilted Maple, Poplar Burl and Zebrawood.  Click here to see examples of these Custom CR Series finishes.

BODY REFERENCE BOUT: Black-dyed maple bout on treble side provides standard violin reference. Easily removable for unrestricted neck access.

FINGERBOARD: Hand-graduated ebony.

BRIDGE: Black-dyed maple, height adjustable via screws on back of body.

STRINGS: NS Electric Strings by D’Addario™ are standard.  Compatible with solid and stranded core violin strings.  Synthetic core strings are not recommended.

PRECISION TUNING HARDWARE: Fine tuners are mounted on the body behind the bridge for precise, stable tuning. Automatic string clamping allows for quick, easy string changes.

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration  (for remarkably even and sustained plucked/pizzicato sound, like a mandolin), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ACTIVE ELECTRONICS: Dual mode preamp allows the player to choose between two distinct tone qualities: (1) the extended frequency response of modern low impedance electronics, for full-blown “electric” sound, and (2) active electronic shaping to replicate the frequency response of the traditional violin, for a more “acoustic” sound. A three-way toggle switch allows the player to select the desired pickup and electronics options.

CONTROLS

• Volume
• Treble EQ
• Bass EQ
• 3-way Switch for Polar pickup:
  • forward – vertical string vibration for sustained pizzicato
  • center – lateral string vibration, full frequency for arco
  • back – lateral string vibration, “acoustic” timbre for arco

HEADPHONE JACK: 1/8″ headphone jack for silent practice and self-monitoring.

LENGTH: 585 MM (23″)

WIDTH: 117 MM (4.6″)

THICKNESS: 49 MM (1.92″)

WEIGHT: 650g

SCALE LENGTH: 366 MM (14.4″)

BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body.

BODY REFERENCE BOUT: Black-dyed maple bout on treble side provides standard viola reference. Easily removable for unrestricted fingerboard access.

FINGERBOARD: Hand-graduated, featuring asymmetric curvature specially designed for enhanced left-hand playing ease.

BRIDGE: Black-dyed maple, adjustable for preferred string height via screws accessed from the back.

STRINGS: NS Electric Strings by D’Addario™ are standard.  Compatible with solid and stranded core viola strings.  Synthetic core strings are not recommended.

PRECISION TUNING HARDWARE: NS Design patented tuning system. Fine tuners are mounted on the body behind the bridge for precise, stable tuning. Automatic string clamping allows for quick, easy string changes.

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration  (for remarkably even and sustained plucked/pizzicato sound, like a mandolin), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Rotary volume control; Tone control (treble roll off); Arco/Pizzicato toggle switch.

BRIDGE PICKUP: The NS Viola features the Polar bridge-mounted piezo pickup system which responds selectively to either vertical vibration (for the sustained plucked sound, like a mandolin), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ACTIVE ELECTRONICS: The dual mode preamp allows the player to choose between two very distinct tone qualities. The first mode delivers the full frequency response of modern low impedance electronics, for a rich, full-blown “electric” sound. The second is balanced to produce the frequency response of the traditional viola, for a more “acoustic” sound. A three-way toggle switch allows the player to select the desired pickup and electronics options. Additional controls include volume and individual bass EQ & treble EQ controls.

PRECISION TUNING HARDWARE: With the NS Design patented tuning system, remarkably precise and stable tuning is accomplished entirely behind the bridge, in the manner similar to the fine tuners of an acoustic instrument. With the elimination of the traditional scroll and pegs, weight is shifted in towards the body of the player for optimum comfort. Although specially formulated NS Electric Viola Strings from D’Addario™ are recommended, any standard solid or stranded core viola string will fit the NS Viola. We do not recommend nylon (Perlon) core or gut core strings.

LENGTH: 585 mm (23″)

WIDTH: 116.8 mm (4.6″)

THICKNESS: 51 mm (2″)

WEIGHT: 775 grams

SCALE LENGTH: 366 mm (14.4″)

STRING SPACING: Bridge 18 mm (0.7″) Nut 38 mm (1.5″)

CONSTRUCTION: Straight grain quarter-sawn solid European maple body and neck, with a flame maple face.

FINISH: Traditional amber stain with polymer top coat. Custom finish options are available for the CR Viola including Slate Gray, Quilted Maple, Poplar Burl and Zebrawood.  Click here to see examples of these Custom CR Series finishes.

BODY REFERENCE BOUT: Black-dyed maple bout on treble side provides standard viola reference. Easily removable for unrestricted neck access.

FINGERBOARD: Hand-graduated ebony.

BRIDGE: Black-dyed maple, height adjustable via screws on back of body.

STRINGS: NS Electric Strings by D’Addario™ are standard.  Compatible with solid and stranded core viola strings.  Synthetic core strings are not recommended.

PRECISION TUNING HARDWARE: Fine tuners are mounted on the body behind the bridge for precise, stable tuning. Automatic string clamping allows for quick, easy string changes.

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration  (for remarkably even and sustained plucked/pizzicato sound, like a mandolin), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ACTIVE ELECTRONICS: Dual mode preamp allows the player to choose between two distinct tone qualities: (1) the extended frequency response of modern low impedance electronics, for full-blown “electric” sound, and (2) active electronic shaping to replicate the frequency response of the traditional viola, for a more “acoustic” sound. A three-way toggle switch allows the player to select the desired pickup and electronics options.

CONTROLS:

• Volume
• Treble EQ
• Bass EQ
• 3-way Switch for Polar pickup:
  • forward – vertical string vibration (for sustained pizzicato)
  • center – lateral string vibration, full frequency for arco
  • back – lateral string vibration, “acoustic” timbre for arco

HEADPHONE JACK: 1/8″ headphone jack for silent practice and self-monitoring.

The tone quality and dynamic range of the NXTa cello owes much to the self-powered NS Polar™ Pickup System. Employing special piezo crystals, mounted beneath the bridge, the pickup captures the full sound spectrum created by the strings and body of the instrument. Arco versus Pizzicato playing creates more vibration energy in one direction than the other, and a convenient switch on the side of the NXTa actually allows the player to select sensitivity for either mode. The result is either more percussive response, or smoother and sustained response, adding a new dimension to what the player can create musically.

The solid maple body and neck along with the graduated fingerboard contribute to the delivery of a rich, full tone that rings true for every note. Asymmetrical fingerboard relief provides extraordinary ease of playability from the lowest to the highest positions. To suit individual player preferences, the fingerboard relief can be adjusted via the truss rod in the neck, and the string height is readily adjustable at the bridge.

NS Electric Strings and most traditional acoustic strings fit all NS cellos, allowing the player to select from a wide range, each with a unique sound a feel. In combination with the easy adjustment of basic set-up parameters, the NXTa Series Cello is adaptable to a nearly limitless range of music styles.

LENGTH: 94.2 cm (37″)

WIDTH: 13.9 cm (5.5″)

THICKNESS: 9.4 cm (3.7″)

WEIGHT:4 string: 1.9 kg (4.1 lbs.)5 string: 1.9 kg (4.2 lbs.)

SCALE LENGTH: 69.5 cm (27.36″”)

BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body. Brass escutcheon pin on the rear of the neck serves as a reference point corresponding to the heel of an acoustic cello.

FINGERBOARD: Hand-graduated. Intonation referenced with cascading dot markers. NXTa cellos are also available with fretted fingerboards.

STRING TUNING:4 string tuning: C G D A5 string tuning: Low F C G D A; High E tuning also available by request: C G D A E

STRINGS: NS Electric Cello Strings supplied; the NS is designed to fit and is compatible with most standard strings.

TRUSS ROD: Single Action.

TUNING HARDWARE: Fully encased worm gear tuners, black finish.

BRIDGE PICKUP: The NS Cello features the Polar bridge-mounted piezo pickup system which responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Passive circuit with high impedance output, no batteries required. Volume control and Tone control (treble roll off).