The EU Electric Upright Bass is made in the Czech Republic to the exact specifications of the original US Series instrument. The revolutionary design is molded with concentric laminations of graphite and rock maple that run the entire length of the instrument for maximum sonic integrity. The back of the neck is curved inward to follow the arch of the fingerboard, resulting in a slim, easy to play neck with full access to the upper register.

The Polar™ Pickup System, with its ability to respond to lateral and vertical vibration separately or both at once, is uniquely suited to an instrument that is both bowed and plucked. A fabulous bowed response and drum like pizzicato attack are characteristic of the lateral mode, while the sustained pizz. response of the vertical mode creates a new dimension for the upright bass. Magnetic pickups by EMG™ add a smooth option to the sound palette. With active EQ and full control of pickup selection, the sonic options are virtually unlimited.

Available in 5 and 6 stringed models, the EU Series Double Bass, designed by Ned Steinberger, is in a class of its own, offering the bassist unparalleled performance and tonal quality.

The post EU Electric Upright Bass appeared first on NS Design.

ACTIVE MODE – Using the supplied charger, the NXTa connects into any AC outlet for 60 seconds, powering the capacitor-powered active circuit for 16 hours from the time of the charge. The instrument can then be plugged straight into any low or high impedance device, no direct box necessary. Since there is no signal loss over the full frequency spectrum of the instrument, the fundamentals of every note remain clear and strong, even with extra-long cables.

PASSIVE MODE – The NXTa can be played in this mode when using a direct box or an amplifier with high impedance input. (This mode provides performance capabilities identical to the original NXT.)

ECO-FRIENDLY OPERATION – NXTa instruments are battery-free, eliminating the hassle and cost of batteries while helping protect our environment.

SOLID MAPLE BODY AND NECK – together with the graduated fingerboard, deliver a rich, full tone that rings true for every note. Asymmetrical fingerboard relief facilitates an even ‘growl’ from the higher strings and a clear, powerful lower register. The adjustable bridge and truss rod allow for low, fast action, or for higher string settings that encourage the traditional acoustic player to ‘dig in’ with gusto.

NS ELECTRIC STRINGS and most traditional acoustic strings fit all NS Double Basses, allowing the player to select from a wide range, each with a unique sound and feel. In combination with the easy adjustment of basic set-up parameters, the NXTa Series Bass is adaptable to many different styles of music.

GIG BAG AND FLIGHT CASE – The NXTa double bass includes a padded gig bag that has a pouch for tripod stand, a bow compartment and room for the charger and accessories. The loaded gig bag will fit in the overhead compartment of most commercial aircraft.  An optional hard-shell flight case is available for the NXTa double bass.

The post NXTa Electric Upright Bass appeared first on NS Design.

• Amber Satin finish
• Adjustable height bridge
• Polar™ Pickup System
• Maple Neck/Body/Bridge
• Hand graduated fingerboard, asymmetric relief, with cascading dot pattern for position reference.
• Adjustable truss rod for precise fingerboard relief adjustment.
• Scale Length: 106 cm (41.73″)
• Length: 132 cm (52″); Width:15 cm (6″); Thickness: 10 cm (4″); Weight: 4.8 kg (10.5 lbs.)
• Compatible with most standard ¾ size upright bass strings
• NS Electric Traditional Double Bass Strings by D’Addario™, specially designed for NS basses, are standard on CRT models. These deliver a classic upright tone, warm and percussive, with a great response to the bow. The bridge is raised to lift the strings above the fingerboard for action typical of the acoustic upright. Higher string tension and action make it possible to “dig in” like on an acoustic, with reserves of rich sound that can be eased back for a traditional tone, or brought forward for exciting new sounds.
• 18-volt active circuit by EMG™ with rotary controls for volume, balance, treble EQ, bass EQ.
  4-String (E-G)
  5-String (Low B-G)
• Padded gig bag standard with bow holder, handle, strap and accessories pouch
• Tool kit, Owners Manual
• Optional NS accessories include: German or French Bass Bow, CR Stand Conversion Kit (works with CR Tripod Stand and CR Bass End Pin Stand), Bass Neck Heel (Thumbstop), Frame Strap System, Boomerang™Strap System, Flight Case, CR stand also accept NXT stand and vise versa.

The post CRT Electric Upright Bass appeared first on NS Design.

LENGTH: 132 cm (52″)

WIDTH: 15 cm (6″)

THICKNESS: 10 cm (4″)

WEIGHT: 4-String 8lbs 12.8oz (4.0 kg); 5-String 9lbs (4.1 kg)

SCALE LENGTH: 106 cm (41.73″)

STRINGS: 4 or 5 (Low B). Compatible with most standard ¾ size double bass strings.

BODY/NECK: Solid, straight grain maple neck and body. Flame maple face on the Amberburst, Transparent Red, and Black models; Brilliant White model has solid maple.

FINGERBOARD: Asymmetric relief for easy playability in every position. Intonation referenced with cascading dot markers. Coform™.

TRUSS ROD: Two-way truss rod, accessible at neck.

TUNING HARDWARE: Fully encased worm gear tuners, black finish.

BRIDGE PICKUP: The Polar piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

ELECTRONICS & CONTROLS: Passive circuit with high impedance output, no batteries required. Volume control, tone control (treble roll off) and a switch to select between Arco and Pizzicato mode.

Optional NS accessories include: German or French Bass Bow, CR Stand Conversion Kit (works with CR Tripod Stand and CR Bass End Pin Stand), Bass Neck Heel (Thumbstop), Frame Strap System, Boomerang™Strap System, Flight Case, CR stand accepted (NXT stand is included with purchase).

The post WAVc Electric Upright Bass appeared first on NS Design.

• EMG™ magnetic pickups expand the range to include classic electric bass sounds. These low-impedance EMG pickups incorporate individually adjustable coils and neodymium magnets. Each coil is buffered separately for a full sound quality with very low noise.
• The CRM Series neck and body are made from select maple.
• The full scale fingerboard is graduated for consistent response from note to note, with adjustable relief and bridge height to suit all playing styles.
• Our Polar™ Bridge Pickup System combines great sound with directional sensitivity, for a rich and expressive response to arco and pizzicato technique.
• Controls include volume, a blend control for magnetic and piezo pickups, the mode of the Polar pickup direction, and individual treble EQ & bass EQ controls. The 18-volt power supply insures plenty of reserve overhead for full dynamics.

Specifications

The post CRM Electric Upright Bass appeared first on NS Design.